Oil and gas

Structural Design of Offshore Floaters: Day 3 - Ultimate and Buckling Strength

Ultimate and Buckling Strength

The course can be taken as standalone or part of the 4-day course.

Value for attending

Gain theoretical knowledge and some practical experience with ultimate and buckling strength methodologies commonly used for offshore floating structural design.

Main Content
This course is a combination of lectures and hands-on practice.
Lectures will cover an introduction to the following design codes:
- Unstiffened and stiffened plated structures (DNVGL-RP-C201)
- PULS (Panel Ultimate Limit State) code
- Unstiffened an stiffened shells (RP-C202)
Participants will solve design examples, assisted by course lecturers:
- Ultimate strength check of stiffened panel design using PULS and GeniE
- Ultimate strength / buckling check of circular columns based on FE analysis
The examples will cover a variety of floater types.

Handouts
Key Seminar Material / Slides issued for reference

Main Lecturers
Grzegorz Malinowski, Principal Engineer, Hull and Structures, DNV GL
Piotr Szalewski, Principal Engineer - Hull and Structures, DNV GL

Contact us:

Jenny Yan Lu
Jenny Yan Lu

Head of Section

Send email

Duration/Time:

08:30 am - 5:00 pm - Registration starts at 8:30 am (Includes lunch)

Value for attending

Gain theoretical knowledge and some practical experience with ultimate and buckling strength methodologies commonly used for offshore floating structural design.

Main Content
This course is a combination of lectures and hands-on practice.
Lectures will cover an introduction to the following design codes:
- Unstiffened and stiffened plated structures (DNVGL-RP-C201)
- PULS (Panel Ultimate Limit State) code
- Unstiffened an stiffened shells (RP-C202)
Participants will solve design examples, assisted by course lecturers:
- Ultimate strength check of stiffened panel design using PULS and GeniE
- Ultimate strength / buckling check of circular columns based on FE analysis
The examples will cover a variety of floater types.

Handouts
Key Seminar Material / Slides issued for reference

Main Lecturers
Grzegorz Malinowski, Principal Engineer, Hull and Structures, DNV GL
Piotr Szalewski, Principal Engineer - Hull and Structures, DNV GL

The course can be taken as standalone or part of the 4-day course.

Day 1 - Introduction
Date
Time
Cost
View/Register
Date
2018 
Time
09:00 am to 04:00 pm
Cost
 $300.00 usd
View/Register
View
Day 2 - Hydrodynamics and Loads
Date
Time
Cost
View/Register
Date
 2018 
Time
09:00 am to 04:00 pm
Cost
$300.00 usd
View/Register
View
Day 3 - Ultimate and Buckling Strength
Date
Time
Cost
View/Register
Date
 2018
Time
09:00 am to 04:00 pm
Cost
$300.00 usd
View/Register
View
Day 4 - Fatigue Design
Date
Time
Cost
View/Register
Date
 2018 
Time
09:00 am to 04:00 pm
Cost
 $300.00 usd 
View/Register
View