Oil and gas

Structural Design of Offshore Floaters: Day 4 - Fatigue Design

structural design

The course can be taken as standalone or part of the 4-day course.

Structural Design of Offshore Floaters: Day 4 - Fatigue Design

Value for attending
Gain theoretical knowledge and some practical experience with fatigue design of offshore floaters.

Main Content
This  course is a combination of lectures and hands-on practice.
Lectures will cover:
- Basics of fatigue, including failure modes, common crack examples
- Fatigue analysis approach with tabulated SCFs, FE based hot-spot methodology, deterministic and stochastic analyses
Participants will solve practical design examples using DNV GL SESAM software:
- Simplified fatigue
- Component stochastic fatigue
- Full stochastic fatigue
The examples will cover a variety of floater types.

Handouts
Key Seminar Material / Slides issued for reference

Main Lecturers

Grzegorz Malinowski, Principal Engineer, Hull and Structures, DNV GL
Piotr Szalewski, Principal Engineer - Hull and Structures, DNV GL
Chris Kubes, Senior Engineeer, DNV GL Software

Structural Design of Offshore Floaters: Day 4 - Fatigue Design

Value for attending
Gain theoretical knowledge and some practical experience with fatigue design of offshore floaters.

Main Content
This  course is a combination of lectures and hands-on practice.
Lectures will cover:
- Basics of fatigue, including failure modes, common crack examples
- Fatigue analysis approach with tabulated SCFs, FE based hot-spot methodology, deterministic and stochastic analyses
Participants will solve practical design examples using DNV GL SESAM software:
- Simplified fatigue
- Component stochastic fatigue
- Full stochastic fatigue
The examples will cover a variety of floater types.

Handouts
Key Seminar Material / Slides issued for reference

Main Lecturers

Grzegorz Malinowski, Principal Engineer, Hull and Structures, DNV GL
Piotr Szalewski, Principal Engineer - Hull and Structures, DNV GL
Chris Kubes, Senior Engineeer, DNV GL Software

The course can be taken as standalone or part of the 4-day course.

Day 1 - Introduction
Date
Time
Cost
View/Register
Date
2018 
Time
09:00 am to 04:00 pm
Cost
 $300.00 usd
View/Register
View
Day 2 - Hydrodynamics and Loads
Date
Time
Cost
View/Register
Date
 2018 
Time
09:00 am to 04:00 pm
Cost
$300.00 usd
View/Register
View
Day 3 - Ultimate and Buckling Strength
Date
Time
Cost
View/Register
Date
 2018
Time
09:00 am to 04:00 pm
Cost
$300.00 usd
View/Register
View
Day 4 - Fatigue Design
Date
Time
Cost
View/Register
Date
 2018 
Time
09:00 am to 04:00 pm
Cost
 $300.00 usd 
View/Register
View